Rounded Corner Speed Gate (Stainless Steel)
The EASCO rounded corner speed gate uses a reinforced SUS304 round-tube frame that keeps a lobby feeling open while it moves 50 persons per minute. Its servo drive opens the hinged doors in under 0.5 seconds and is rated for 15 million cycles. EASCO builds this automatic speed gate turnstile in-house in Shenzhen and ships it factory direct with a 12-month warranty.
SUS304 Stainless Steel Construction with a DC Servo Motor
The frame combines a 1.5 mm SUS304 top cover with 2.0 mm round tubing, so the gate looks light but handles daily rush hours. A DC servo and planetary gear unit delivers 200 W, with a 350 W peak, and is rated for 15 million continuous open and close cycles. Precise infrared sensing and a smart reset system keep passage smooth and reliable.
High-Security Entry with Multiple Authentication Methods
Eight verification options are available: face, palm vein, fingerprint, iris, alcohol detection, buttons, QR code and card reading. The recognition modules are customizable, so biometric access control integration follows the way your venue already identifies people. Share your site details and we recommend the right mix.
Product Dimensions and Lane Layout
The gate measures 1,500 × 108 × 1,000 mm, a slim body that leaves more floor for your lobby. Check the figures against your entrance and send a drawing if you are unsure. We confirm the fit and return the best layout for high traffic pedestrian entrance management.
Rounded Corner Speed Gate: Complete Technical Specification
Credential In. Gate Opens. 4 Steps.
Step 1 — Identity verification
The reader checks the credential and sends an open signal over RS485, RS232 or IO.
Step 2 — Controller signal
The gate controller activates the servo motor.
Step 3 — Gate movement
The servo and planetary reducer open the doors in under 0.5 seconds while six infrared pairs watch the lane. Throughput reaches 50 persons per minute.
Step 4 — Safety and reset
Resistance triggers anti-pinch protection. On a power cut, the gate opens for evacuation.
What Buyers Ask Before Ordering the Rounded Corner Speed Gate
Both share the servo planetary drive, the 15-million-cycle lifespan and 50 persons per minute. This speed gate has a slimmer 108 mm body and rounded corners for premium lobbies. The right-angle swing gate has a 180 mm body and sharp industrial lines for wider passages.
High-end office buildings, government agencies, tech parks, CBD districts, hotel lobbies, convention centres, banks and airport VIP lanes, where speed, looks and durability all count.
Yes. Six infrared pairs are standard, and anti-pinch and anti-collision protection engage immediately on resistance.
Yes. It is rated for indoor and outdoor use from -20°C to 75°C.
Face recognition, IC/ID card, QR code, ID card and palm print, all through add-on peripheral modules.
Contact EASCO via WhatsApp (+86 13711422283) or email hattiehuang@szeasco.cn with your lane count, passage width, credential requirements, and destination.
Ready to Order the Rounded Corner Speed Gate?
Share your lane count, passage width and peripheral needs, and an EASCO engineer confirms the right configuration before you order. For softer swing wings at a lower motor rating, compare the rounded corner swing gate. EASCO has built entry hardware in the same Shenzhen factory since 2009, as the About EASCO page explains. Manufactured in-house, factory direct, ISO 9001 certified, with a 12-month warranty.
Hattie Huang
كبير المهندسين في EASCO
تمتلك هاتي هوانغ أكثر من 20 عاماً من الخبرة الهندسية في تصميم وتطوير البوابات الأمنية، حيث قدمت استشارات وحلولاً لأكثر من 500 علامة تجارية ومشروع عالمي.
Not Sure What You Need?
Discuss environment parameters and requirements with a product expert.
تم تسجيل طلب الاستشارة بنجاح
شكراً لك. تم استلام تفاصيل مشروعك بنجاح وسيتواصل معك مهندس متخصص في الوقت الذي حددته.