CE · FCC · ISO9001 Certified | Trusted in 50+ Countries
Home Products Why Us Customizations Contact
Rounded Corner Swing Gate (Stainless Steel)
STAINLESS STEEL SWING GATE

Rounded Corner Swing Gate (Stainless Steel)

The EASCO rounded corner swing gate replaces sharp stainless steel edges with smooth SUS304 curves. The result is a softer look in the lobby and less risk of knocks as people pass. This automatic swing gate turnstile opens in under 0.5 seconds, moves 50 persons per minute and is rated for indoor and outdoor use. EASCO builds it in-house in Shenzhen and ships it factory direct with a 12-month warranty.

✓ 12 Months Factory Warranty
✓ ISO 9001 & CE Certified
50/min
Throughput
<0.5 s
Opening Speed
10M Cycles
Motor Lifespan
SUS304
Material

SUS304 Stainless Steel Construction with a Brushless DC Motor

The gate body uses SUS304 stainless steel, with a 1.5 mm top cover and a 1.0 mm enclosure, so it resists wear in busy entrances. A 60 W brushless DC gear motor drives the wings and is rated for 10 million continuous open and close cycles. A smart reset system returns the wings to the closed position, and infrared sensing detects people in the lane for smooth, dependable operation.

SUS304 Stainless Steel Construction with a Brushless DC Motor

High-Security Entry with Multiple Authentication Methods

A swing gate is only as strict as the credential behind it, so EASCO lets you choose from eight options: face, palm vein, fingerprint, iris, alcohol detection, buttons, QR code and card reading. Because the recognition modules are customizable, the gate can match the way your site already verifies people, and biometric access control integration works through the same open signal as a simple card reader. Send us your venue details and we recommend the best combination.

Metal work SUS304 stainless steel, top cover 1.5 mm, enclosure 1.0 mm
Corners rounded corner processing for a smooth, flowing profile
Drive 60 W brushless DC gear motor, 10 million cycles
Wings acrylic or tempered glass panels
Passage width 550 to 1,200 mm, which can be customized to your drawing
Size 1,400 (L) × 180 (W) × 1,025 (H) mm
Dimensions: 1,400 (L) × 180 (W) × 1,025 (H) mm
High-Security Entry with Multiple Authentication Methods

Product Dimensions and Lane Layout

The gate measures 1,400 × 180 × 1,025 mm. Check the figures against your entrance before ordering, and send us a drawing if you are unsure. We confirm the fit and return the best layout. Where traffic needs to be split into two directions, single or dual mechanism configurations are available.

Face recognition terminals
IC/ID card readers
QR code scanners
ID card and passport readers
Palm print recognition
Wireless remote controls
Audible and visual alarms
Fire alarm integration modules
Product Dimensions and Lane Layout

Rounded Corner Swing Gate: Complete Technical Specification

Drive motor
Brushless DC gear motor
Motor power
60 W
Motor lifespan
10 million continuous open/close cycles
Gate opening method
RS485 / RS232 / IO
Throughput
50 persons/minute
Gate opening speed
<0.5 s (adjustable)
Power supply
DC 24 V, 15 A
Chassis material
SUS304 stainless steel, top cover 1.5 mm, enclosure 1.0 mm
Swing door material
Acrylic
Passage width
550–1,200 mm (customizable)
Dimensions
1,400 (L) × 180 (W) × 1,025 (H) mm
Infrared sensors
6 pairs standard
Operating temperature
-20°C to 75°C
Relative humidity
0–90%, non-condensing
Usage environment
Indoor and outdoor
Safety
Anti-pinch protection; opens for evacuation on power cut

Credential In. Gate Swings. 4 Steps.

1

Step 1 — Identity verification

The reader checks the credential and sends the open signal.

2

Step 2 — Controller signal

The gate controller activates the brushless gear motor.

3

Step 3 — Gate movement

The motor opens the wings in under 0.5 seconds while six infrared pairs monitor the lane, which supports 50 persons per minute.

4

Step 4 — Safety and reset

Any resistance triggers anti-pinch protection. On a power cut, the gate opens for evacuation.

Credential In. Gate Swings. 4 Steps.

What Buyers Ask Before Ordering the Rounded Corner Swing Gate

The rounded corner model has curved corners for a softer look and a lower collision risk, with a brushless motor rated for 10 million cycles. The right-angle swing gate has sharp, bold corners and a higher-power servo planetary drive rated for 15 million cycles. Choose by design language and traffic priority.

50 persons per minute, with an opening time under 0.5 seconds. Single or dual mechanism configurations are available for traffic diversion.

Yes. Six pairs of infrared sensors are standard, and anti-pinch and anti-collision protection engage automatically when the gate meets resistance.

Yes. It is rated for indoor and outdoor use from -20°C to 75°C.

Face recognition, card, QR code, ID card and palm print recognition, all through peripheral modules.

Contact EASCO via WhatsApp (+86 13711422283) or email hattiehuang@szeasco.cn with your lane count, passage width, and credentials needed.

Discuss Your Access Control Requirements

Share your lane count, passage width and peripheral needs, and an EASCO engineer confirms the right configuration before you order. If your entrance needs faster flow, the rounded corner speed gate uses a 15-million-cycle servo drive. Manufactured in-house in Shenzhen, factory direct, ISO 9001 certified, with a 12-month warranty. Browse the full access control product range to compare models.

Hattie Huang

Hattie Huang

Senior Engineer at EASCO

Hattie Huang brings 20+ years of engineering turnstiles, having guided 500+ brands in gate openers to turnstile solutions.

PATH 2

Not Sure What You Need?

Discuss environment parameters and requirements with a product expert.

✓

Expert Consultation Scheduled

Thank you. Your project brief has been recorded. An English-speaking access controller analyst will contact you at your preferred time.