Certificado CE · FCC · ISO9001 | Confiável em Mais de 50 Países
Início Produtos Por Que Nós Personalizações Contato
Single Lane Full Height Turnstile (BQ-S)
FULL HEIGHT TURNSTILE

Single Lane Full Height Turnstile (BQ-S)

The EASCO BQ-S is a single lane full height turnstile for entrances where one secure lane is all you need. Its 2,200 mm enclosed cross-arm barrier enforces one person per authorization with steel, not just software, so tailgating and climbing are physically blocked. EASCO makes this automatic full height turnstile gate in-house in Shenzhen and ships it factory direct with a 12-month warranty.

✓ 12 Months Factory Warranty
✓ ISO 9001 & CE Certified
30/min
Throughput
1–2 s
Opening Speed
2,200 mm
Gate Height
SUS304
Material

High-Security Entry with Multiple Authentication Methods

This single channel full height turnstile adapts to the identification method your site already uses. Choose button operation, microwave sensor triggering, face recognition or remote control, and change the mode as your needs change. The gate takes a relay switch signal from the reader, so biometric turnstile access control and a basic push-button booth both connect the same way.

High-Security Entry with Multiple Authentication Methods

The Opening-Closing Movement Path

The cross-shaped barrier arm turns 90° to release one person, then locks again. Here is what the build offers: Want two lanes side by side? The dual lane model runs two independent cross-arm sets in parallel. For questions about the movement path, contact EASCO online for technical support.

Height 2,200 mm on this single lane model
Body 304 stainless steel, 1.0 mm thick, with a hydraulic arm
Barrier arm cross-shaped, with a 2.0 mm main arm
Direction 90° swing angle, unidirectional or bidirectional
Structure one-piece molding with no exposed fasteners or footholds
Dual-lane model: two independent cross-arm sets in parallel
The Opening-Closing Movement Path

Suitable for High-Security Sites

Full height turnstiles bring strict pedestrian access control to high-security premises. They are widely used at oil fields, embassies, factories, stadiums, jails, banks, stations and construction sites, where the tall enclosure resists tailgating and illegal entry. Many factory access control projects start with a single lane gate like this one at a gatehouse. Each lane accepts card, fingerprint or face recognition to admit authorized people only.

Face recognition terminals
IC/ID card readers
Fingerprint scanners
QR code scanners
Visitor management systems
LED access display screens
Audible and visual alarms
Fire alarm modules
Suitable for High-Security Sites

Product Dimensions

The BQ-S measures 1,630 × 1,500 × 2,200 mm. Check these against your gatehouse or fence line before ordering. If you are unsure, send us a drawing and we confirm the fit and the best configuration.

Relay switch signal input works with standard readers
Fire alarm module opens the gate automatically on power cut
Cloud-based backend tracks access logs in real time
Product Dimensions

Single Lane Full Height Turnstile: Complete Technical Specification

Power supply
AC 220 V ±10%, 50 Hz
Drive motor
DC servo motor
Motor power
30 W / 24 V
Opening/closing time
1–2 s
Throughput
30 persons/minute
Body material
304 stainless steel, 1.0 mm, with hydraulic arm
Barrier arm
Cross-shaped, 2.0 mm main arm
Swing angle
90°
Direction
Unidirectional or bidirectional
Input interface
Relay switch signal
Gate height
2,200 mm
Dimensions
1,630 × 1,500 × 2,200 mm
Operating temperature
-15°C to 60°C
Humidity
5–90% RH, non-condensing
Usage environment
Indoor; outdoor with canopy
Emergency release
Free rotation on power cut or fire alarm signal

Credential In. Cross-Arm Rotates. One Person Through.

1

Step 1 — Identity Verification

The reader checks the credential and sends a relay switch signal to the gate controller.

2

Step 2 — Controller Signal

The controller receives the signal and releases the cross-arm for one 90° rotation.

3

Step 3 — Gate Movement

The servo drive turns the arm 90° in 1 to 2 seconds. One person passes, and the arm locks again. A second person cannot follow without a second authorization.

4

Step 4 — Safety and reset

Infrared anti-pinch monitoring runs throughout. On power cut or fire alarm, the mechanism releases for free rotation, so egress is never blocked in an emergency.

Credential In. Cross-Arm Rotates. One Person Through.

What Buyers Ask Before Ordering a Full Height Turnstile

Flap barriers and swing gates deter entry but cannot stop a determined person stepping over or around them. The 2.2 m cross-arm enclosure makes bypass physically difficult without cutting through the structure. It is the right tier for construction sites, industrial parks and high-security perimeters.

30 persons per minute. The cross-arm completes a 90° rotation in 1 to 2 seconds, which enforces one person per pass.

Face recognition terminals, IC/ID card readers, fingerprint scanners, QR code scanners, visitor management systems, LED displays, alarms and fire alarm modules, all through a standard relay switch signal input.

Yes, with a protective canopy. The operating temperature range is -15°C to 60°C.

Yes. On a power cut or fire alarm signal, the cross-arm releases and rotates freely. Confirm this meets your local fire code before installation.

Contact EASCO via WhatsApp (+86 13711422283) or email hattiehuang@szeasco.cn with your lane count, access control requirements, site environment, and shipping destination.

Ready to Order a Single Lane Full Height Turnstile?

Share your lane count, peripheral devices and site conditions. An EASCO engineer confirms whether a full height turnstile is the right security tier before you commit. Need a particular finish, logo or reader position? Our custom turnstile gate manufacturing service covers it. Manufactured in-house in Shenzhen, factory direct, ISO 9001 certified, with a 12-month warranty.

Hattie Huang

Hattie Huang

Senior Engineer at EASCO

Hattie Huang brings 20+ years of engineering turnstiles, having guided 500+ brands in gate openers to turnstile solutions.

PATH 2

Not Sure What You Need?

Discuss environment parameters and requirements with a product expert.

✓

Expert Consultation Scheduled

Thank you. Your project brief has been recorded. An English-speaking access controller analyst will contact you at your preferred time.