Water Drop Speed Gate (JC2)
The EASCO JC2 water drop speed gate runs two lanes off one shared center column instead of three posts, which shrinks the footprint of a dual lane install without touching per-lane throughput. Its curved water-drop panels give the entrance fluid lines and an open look. This aluminum alloy speed gate opens in under 0.5 seconds and moves 50 persons per minute per lane. EASCO builds it in-house in Shenzhen and ships it factory direct with a 12-month warranty.
Two Lanes. One Center Column. Less Floor Space.
The aluminum alloy cylindrical case fits compact settings. A DC brushless all-in-one unit powers it, and a smart reset system restores the gate automatically after each passage. Because both gate panels hang from one column, you save floor space and hardware compared with a standard three-post dual lane layout.
High-Security Entry with Multiple Authentication Methods
Eight verification options are available: face, palm vein, fingerprint, iris, alcohol detection, buttons, QR code and card reading. Customizable recognition modules let the gate follow the way your site already identifies people, including biometric authentication integration.
Product Dimensions and Lane Layout
Check your entrance against the drawing and send a plan if you are unsure. We confirm the fit and the lane layout. This model is rated for indoor use. For outdoor sites, choose the IP65 waterproof speed gate.
JC2 Water Drop Speed Gate: Complete Technical Specification
Credential In. Gate Opens. 4 Steps.
Every Xingyun gate follows the same control flow — from credential check to passage — in under a second.
Step 1 — Identity verification
The chosen credential module (card, QR code or face panel) processes the authorization. The comparison runs locally on the ARM control core.
Step 2 — Controller signal
The ARM industrial control core sends an open signal over RS485, RS232 or IO relay. Wiegand 26/34 output is available for third-party integration.
Step 3 — Gate movement
The brushless motor opens the gate in under 0.5 seconds, and the passage holds open for the configured dwell time. Throughput reaches 50 persons per minute per lane.
Step 4 — Safety and reset
Resistance triggers reverse braking and three-stage torque compensation. On a power cut, the gate opens automatically and the control core keeps its position.
What Buyers Ask Before Ordering the JC2 Water Drop Speed Gate
The shared center column. A conventional two-lane setup needs a post on each outer edge plus one in the middle. The JC2 replaces the middle post with one column that carries both gate panels, so you use less floor space and hardware at the same 50 persons per minute per lane.
Not by default. Infrared sensors are an optional add-on (1 pair). Specify them when ordering if automatic tailgate detection matters on your site.
A card reader, QR code scanner, ID and passport reader and a 7-inch Android face recognition panel. The base unit works from a remote control or external button signal without any of them.
No. It is an indoor-rated gate. For outdoor sites, use the IP65 waterproof model.
15 million continuous open and close cycles. The brushless motor needs no brush replacement, only periodic lubrication of the mechanical parts.
Send EASCO your lane count, passage width, and which credential modules you need, along with your shipping destination via WhatsApp (+86 13711422283) or email at hattiehuang@szeasco.cn.
If it's genuinely a single lane, the JBH's smaller single-unit footprint is the better fit. The JC2 's advantage only shows up on dual-lane installs — that's where the shared column actually saves space versus a standard three-post layout.
Ready to Order the JC2 Water Drop Speed Gate?
Tell EASCO your lane count, passage width and credential needs, and our engineers confirm the right setup before you order. Manufactured in-house in Shenzhen, factory direct, ISO 9001 certified, with a 12-month warranty.
Hattie Huang
Senior Engineer at EASCO
Hattie Huang brings 20+ years of engineering turnstiles, having guided 500+ brands in gate openers to turnstile solutions.
Not Sure What You Need?
Discuss environment parameters and requirements with a product expert.
Expert Consultation Scheduled
Thank you. Your project brief has been recorded. An English-speaking access controller analyst will contact you at your preferred time.