حاصل على شهادات CE · FCC · ISO9001 | موثوق به في أكثر من 50 دولة
الرئيسية المنتجات لماذا نحن التخصيص اتصل بنا
Water Drop Speed Gate (JC2)
COMPACT ALUMINUM ALLOY SPEED GATE

Water Drop Speed Gate (JC2)

The EASCO JC2 water drop speed gate runs two lanes off one shared center column instead of three posts, which shrinks the footprint of a dual lane install without touching per-lane throughput. Its curved water-drop panels give the entrance fluid lines and an open look. This aluminum alloy speed gate opens in under 0.5 seconds and moves 50 persons per minute per lane. EASCO builds it in-house in Shenzhen and ships it factory direct with a 12-month warranty.

✓ 12 Months Factory Warranty
✓ ISO 9001 & CE Certified
50/min
معدل المرور
<0.5 s
سرعة الفتح
15M Cycles
العمر الافتراضي للمحرك
550–1,200 mm
عرض الممر

Two Lanes. One Center Column. Less Floor Space.

The aluminum alloy cylindrical case fits compact settings. A DC brushless all-in-one unit powers it, and a smart reset system restores the gate automatically after each passage. Because both gate panels hang from one column, you save floor space and hardware compared with a standard three-post dual lane layout.

Two Lanes. One Center Column. Less Floor Space.

High-Security Entry with Multiple Authentication Methods

Eight verification options are available: face, palm vein, fingerprint, iris, alcohol detection, buttons, QR code and card reading. Customizable recognition modules let the gate follow the way your site already identifies people, including biometric authentication integration.

Shared center-column structure dual lanes, reduced footprint
Water-drop curved panel profile fluid lines, open visual feel
Full aluminum alloy chassis with a 2.5 mm column wall
Acrylic or tempered glass gate panels
Passage width 550 to 1,200 mm per lane, customized to your drawing
High-Security Entry with Multiple Authentication Methods

Product Dimensions and Lane Layout

Check your entrance against the drawing and send a plan if you are unsure. We confirm the fit and the lane layout. This model is rated for indoor use. For outdoor sites, choose the IP65 waterproof speed gate.

IC/ID card reader
QR code scanner
ID card and passport reader
7-inch Android face recognition panel
Remote control, button or smart terminal signal (standard)
Product Dimensions and Lane Layout

JC2 Water Drop Speed Gate: Complete Technical Specification

Drive motor
DC brushless مستشعر هول الخطي (Linear Hall) + مخفض تروس كوكبي مدمج
Motor power
100 W (peak 350 W)
Motor lifespan
15 million continuous open/close cycles
Gate opening mode
RS485 / RS232 / IO
Throughput
50 persons/minute per lane
Gate opening speed
<0.5 s (قابل للتعديل)
Power supply
DC 24 V, 15 A
Chassis material
Aluminum alloy, column wall 2.5 mm
Gate panel material
أكريليك عالي الشفافية
Passage width
550–1,200 mm (customizable)
Infrared sensors
اختياري (1 pair)
Operating temperature
-20°C to +75°C
Relative humidity
0–90%, no condensation
Usage environment
Indoor
Safety
Reverse braking and three-stage torque compensation

Credential In. Gate Opens. 4 Steps.

Every Xingyun gate follows the same control flow — from credential check to passage — in under a second.

1

Step 1 — Identity verification

The chosen credential module (card, QR code or face panel) processes the authorization. The comparison runs locally on the ARM control core.

2

Step 2 — Controller signal

The ARM industrial control core sends an open signal over RS485, RS232 or IO relay. Wiegand 26/34 output is available for third-party integration.

3

Step 3 — Gate movement

The brushless motor opens the gate in under 0.5 seconds, and the passage holds open for the configured dwell time. Throughput reaches 50 persons per minute per lane.

4

Step 4 — Safety and reset

Resistance triggers reverse braking and three-stage torque compensation. On a power cut, the gate opens automatically and the control core keeps its position.

Credential In. Gate Opens. 4 Steps.

What Buyers Ask Before Ordering the JC2 Water Drop Speed Gate

The shared center column. A conventional two-lane setup needs a post on each outer edge plus one in the middle. The JC2 replaces the middle post with one column that carries both gate panels, so you use less floor space and hardware at the same 50 persons per minute per lane.

Not by default. Infrared sensors are an optional add-on (1 pair). Specify them when ordering if automatic tailgate detection matters on your site.

A card reader, QR code scanner, ID and passport reader and a 7-inch Android face recognition panel. The base unit works from a remote control or external button signal without any of them.

No. It is an indoor-rated gate. For outdoor sites, use the IP65 waterproof model.

15 million continuous open and close cycles. The brushless motor needs no brush replacement, only periodic lubrication of the mechanical parts.

Send EASCO your lane count, passage width, and which credential modules you need, along with your shipping destination via WhatsApp (+86 13711422283) or email at hattiehuang@szeasco.cn.

If it's genuinely a single lane, the JBH's smaller single-unit footprint is the better fit. The JC2 's advantage only shows up on dual-lane installs — that's where the shared column actually saves space versus a standard three-post layout.

Ready to Order the JC2 Water Drop Speed Gate?

Tell EASCO your lane count, passage width and credential needs, and our engineers confirm the right setup before you order. Manufactured in-house in Shenzhen, factory direct, ISO 9001 certified, with a 12-month warranty.

Hattie Huang

Hattie Huang

كبير المهندسين في EASCO

تمتلك هاتي هوانغ أكثر من 20 عاماً من الخبرة الهندسية في تصميم وتطوير البوابات الأمنية، حيث قدمت استشارات وحلولاً لأكثر من 500 علامة تجارية ومشروع عالمي.

المسار 2

Not Sure What You Need?

Discuss environment parameters and requirements with a product expert.

✓

تم تسجيل طلب الاستشارة بنجاح

شكراً لك. تم استلام تفاصيل مشروعك بنجاح وسيتواصل معك مهندس متخصص في الوقت الذي حددته.