JFX Aluminum Alloy Speed Gate
The EASCO JFX is a premium aluminum alloy speed gate for high-end commercial entrances, and it is the fastest and quietest gate in the range. Its direct-drive servo motor opens the gate in under 0.3 seconds, moves more than 50 persons per minute and runs below 40 dB. EASCO builds this direct drive servo speed gate in-house in Shenzhen and ships it factory direct with a 12-month warranty.
Direct-Drive Servo Motor with a 7-Inch Visual Control Panel
A high-precision direct-drive servo motor (110 W, 400 W peak) gives stable, smooth operation, and sensitive infrared sensing detects people quickly. The integrated 7-inch panel makes setup easy and cuts maintenance costs, while the aluminum alloy build, with a 9 mm top cover and 2.5 mm column wall, adds strength and corrosion resistance.
High-Security Entry with Multiple Authentication Methods
Eight verification options are available: face, palm vein, fingerprint, iris, alcohol detection, buttons, QR code and card reading. Several methods can run on one panel at the same time, which gives you multi-modal biometric authentication without extra hardware.
Product Dimensions and Integration Options
Check your entrance against the drawing and send a plan if you are unsure. We confirm the fit and the lane layout.
.jpg)
JFX Aluminum Alloy Speed Gate: Complete Technical Specification
Credential In. Gate Opens. 4 Steps.
Every Interstellar gate follows the same control flow — from identity check to passage — in under a second.
Step 1 — Identity verification
The face panel detects the user at 0.5 to 3 m and finishes recognition in 200 to 300 ms at 99.98% accuracy. The comparison runs on the onboard processor, so access decisions need no cloud round trip. Card or QR readers process credentials in parallel.
Step 2 — Controller signal
The ARM industrial control core sends an open signal over RS485, RS232 or IO relay. Wiegand 26/34 output is available for third-party platforms.
Step 3 — Gate movement
The direct-drive servo motor opens the gate in under 0.3 seconds and holds the passage open for the configured dwell time.
Step 4 — Safety and reset
If the gate meets resistance, reverse braking and three-stage torque compensation engage before contact. Infrared sensors re-close the gate if a second person follows. On a power cut, the gate opens and the control core keeps its position.
What Buyers Ask Before Ordering the JFX Speed Gate
More than 50 in continuous flow. The sub-0.3-second opening removes the gap between authorization and passage, which pushes throughput past the standard 50 per minute.
Yes. RS485, RS232 and IO relay cover standard integrations, and HTTP/HTTPS, WebSocket and MQTT support custom software connections. A hardware SDK and device API support bespoke work. Confirm compatibility with your specific platform during project planning.
Face recognition (99.98% accuracy, 100,000-face capacity), card, QR code and an optional ID and passport module, all through one panel, with several methods usable at once.
Reverse braking with staged torque compensation engages the moment resistance is detected, stopping the panel before contact. It is a built-in mechanical response, not a software setting.
No. It is an indoor gate. For outdoor sites, choose the IP65 JFW waterproof model.
That depends on the site. If speed, near-silent operation or a larger onboard face database matter, the difference is functional, not cosmetic. For a standard office lobby with typical traffic, the JF4 delivers the same core reliability for less.
Depends on what the site actually needs. If speed, near-silent operation, or a larger onboard face database matter to the project, the difference is functional, not cosmetic. If the entrance is a standard office lobby with typical traffic, the JF4 delivers the same core reliability for less.
Ready to Order the JFX Speed Gate?
Tell EASCO your lane count, passage width and integration needs, and an engineer confirms the right configuration before you order. Manufactured in-house in Shenzhen, ISO 9001 certified, with a 12-month warranty on every unit.
Hattie Huang
Senior Engineer at EASCO
Hattie Huang brings 20+ years of engineering turnstiles, having guided 500+ brands in gate openers to turnstile solutions.
Not Sure What You Need?
Discuss environment parameters and requirements with a product expert.
Expert Consultation Scheduled
Thank you. Your project brief has been recorded. An English-speaking access controller analyst will contact you at your preferred time.